In-stock 6300-series PCBs for Dover and ThyssenKrupp traction elevator systems. Sales, repair, and exchange. Ships nationwide from Hackensack, NJ.
All boards tested and verified. Call or email for current availability and pricing.
4517 Rev. F
Hall Lantern / Display Controller
Green PCB hall lantern and display controller board. Features LCD display, push buttons, fuse holders, and orange terminal blocks. Used in Dover and ThyssenKrupp traction elevator hall fixtures.
Inquire about this board
3018 Rev. B
Velocity / Car Controller Sub-Board
Small green PCB velocity and car controller sub-board labeled S24-1. Features ribbon connectors and transformer modules. Interfaces with the main controller in Dover traction systems.
Inquire about this board
TK Elevator Copyright 2004
Absolute Encoder Interface Board
Small green PCB absolute encoder interface board labeled ENCINT2. Features orange terminal blocks and DB9 connector. Used in ThyssenKrupp EDR2 traction elevator systems for encoder feedback.
Inquire about this board
ThyssenKrupp Elevator EDR2 Copyright 2004
Drive / Power Board
Long green PCB drive and power board labeled 675HA2. Features heatsink, blue capacitor, and A-OK indicator LED. Part of the ThyssenKrupp EDR2 drive system for traction elevators.
Inquire about this board
Dover Elevator Systems Inc. 1990
Dover DMC Drive Board
Long blue PCB classic Dover DMC drive board labeled 675AB / 675AC. Features DMC-I CONTROL and DMC-I PULSER ICs, power transistors, and heatsink fins. A foundational board in legacy Dover DC traction elevator drive systems.
Inquire about this board
TK Elevator Copyright 2004
EDR2 Drive Board Variant
Long green PCB EDR2 drive board variant labeled 675ET4. Features heatsink and large capacitor. Functions as a drive board variant within the ThyssenKrupp EDR2 traction elevator control system.
Inquire about this board
thyssenkrupp Elevator Copyright 2015, 3823 Rev. 210
Main Controller / AGW Board
Very large green PCB main controller AGW board. Features extensive orange and black terminal blocks, inspection switches, and multiple ICs. The central control board for thyssenkrupp traction elevator systems manufactured from 2015 onward.
Inquire about this board
ThyssenKrupp Elevator Copyright 2004, 6300XD1-LF 2021 Rev. L
Network / Communications Board
Square green PCB network and communications board. Features Ethernet port, orange terminal blocks, and CGA processor. Handles network communications in ThyssenKrupp traction elevator control systems.
Inquire about this board
ThyssenKrupp Elevator IOE Copyright 2012, 675SR008
I/O Expansion / Inspection Board
Large green PCB I/O expansion and inspection board. Features inspection switches (UP/DOWN/ENABLE/RESCUE), door bypass switches, and extensive orange terminal blocks. Provides field I/O and inspection control for ThyssenKrupp traction elevator systems.
Inquire about this board
ThyssenKrupp Elevator © Copyright 1992
Power Unit Relay Board
Large green PCB power unit relay board with extensive relay socket array, fuse holders, heatsink blocks, and A-OK status indicator. Controls power switching and relay logic in ThyssenKrupp traction elevator drive systems.
Inquire about this board
ThyssenKrupp Elevator © Copyright 2002
Main CPU / Selector Controller Board
Very large green PCB main CPU and selector controller board. Features extensive IC arrays, edge connectors (P4–P6), RS422 and RS232 serial ports. The central processing board for ThyssenKrupp traction elevator selector systems.
Inquire about this board
ThyssenKrupp Elevator © Copyright 2004, labeled 675JK1
DMC-I Selector Board
Green PCB DMC-I Selector board. Features large FPGA/processor IC, white edge connectors, and red resistor arrays. Controls selector logic in ThyssenKrupp DMC-I traction elevator drive systems.
Inquire about this board
Dover Elevator © Copyright 1990, Fab01 rev0
Auxiliary Sensor Board
L-shaped green PCB auxiliary sensor board with two optical sensors and cable harness. Used in Dover traction elevator systems for position sensing and floor detection. Classic Dover 1990-era design.
Inquire about this board
ThyssenKrupp Elevator © Copyright 2001
DMC-I Main Sensor Board
Long narrow green PCB DMC-I main sensor board with ribbon cable connector, optical sensors, and breakpoint pads. Provides primary position sensing for ThyssenKrupp DMC-I traction elevator selector systems.
Inquire about this boardDover Elevator Systems was one of the largest elevator manufacturers in North America before being acquired by ThyssenKrupp Elevator in 1999. Their 6300-series control boards were used extensively in traction elevator installations throughout the 1980s and 1990s.
ThyssenKrupp continued and expanded the 6300-series platform through the EDR2 and later control systems, with boards manufactured through the 2010s. Many of these systems remain in active service today.
Gemini Elevator Service stocks, sells, and repairs 6300-series boards for both legacy Dover and ThyssenKrupp traction elevator systems. Our 40 years of experience means we can identify the right board for your system and get it to you fast.
All units come with a 1-year warranty. We also offer board repair and exchange programs for boards not currently in stock.
Call us or send an inquiry with your ASSY number and we'll confirm availability and pricing same day.
